GTB/ZR-1
Dec 31 2009, 12:59 PM
Hi all,
Current '09 President Chris Wells & I had an idea abt a special 50th Anniversary logo that we can have Patsy & Terry make up for the side of our trailer to proclaim our achievement proudly!
We think that a 'create-a-logo' contest, open to all, would be a neat idea. We can review entries and pick a winner. A possible prize may be free entry to our special 50th Anniversary Event which we'll be starting to plan here shortly.
If we have enough interest, we'll have some rules/deadlines for the contest written up to make it official.
If you're artistically & creatively inclined--you could become part of history!
So... Anyone interested (besides Bradley LOL)?
RandSS
Jan 1 2010, 05:50 PM
Im in George-
Randall
xer0trigger
Jan 2 2010, 02:22 PM
Sure, I'll take a crack at it
GTB/ZR-1
Jan 2 2010, 03:32 PM
Okay, Randall & Travis are in the mix--anyone else?
moparkarel
Jan 2 2010, 10:14 PM
If crayons and art paper are allowed I'l give it a shot! Can I use

glue too? I promise not to run with the sissors!
ucfquattroguy
Jan 3 2010, 08:22 AM
QUOTE (moparkarel @ Jan 2 2010, 10:14 PM)

If crayons and art paper are allowed I'l give it a shot! Can I use

glue too? I promise not to run with the sissors!
As long as you're not sniffing the glue...that's fine.
xer0trigger
Jan 4 2010, 10:57 AM
Are there any guidelines to this? Like what should be included or specific verbiage?
GTB/ZR-1
Jan 4 2010, 02:28 PM
QUOTE (xer0trigger @ Jan 4 2010, 11:57 AM)

Are there any guidelines to this? Like what should be included or specific verbiage?
Not really, just highlighting our 50th yr...
moparkarel
Jan 4 2010, 11:33 PM
QUOTE (ucfquattroguy @ Jan 3 2010, 09:22 AM)

As long as you're not sniffing the glue...that's fine.

Almost everyone knows

you don't sniff the elmers, its edible! But too much will plug you up!!!!
DNB222
Jan 24 2010, 09:29 PM
I'm in...I know this is kind of late, but if there hasn't been a logo made I'll work on one.
kabel
Jan 24 2010, 10:30 PM
I think the board is hoping for submissions by March...
GTB/ZR-1
Jan 25 2010, 08:52 PM
QUOTE (kabel @ Jan 24 2010, 11:30 PM)

I think the board is hoping for submissions by March...
We'll be working out specifics here shortly for those interested. I've had just a few interested, so one's chances may be good!
rx-7autoxer
Feb 6 2010, 12:30 PM
Hey everyone, for the competition, please submit all ideas or designs to me (Leland Giddens) through a private message on the forum, or through my e-mail at rx7autoxer@bellsouth.net
All submission must be made by Feb. 28, 2010. After that date, no more shall be accepted. Good luck everyone!!
Thanks
-Leland
PW3.com
Feb 14 2010, 10:20 PM
WTF! LOL
PW3.com
Feb 17 2010, 12:19 PM
So... Anyone interested (besides Bradley LOL)?
[/quote]
WTF!!!!
An anonymous entry LOL you will never know!!! Buhahaha
xer0trigger
Feb 22 2010, 10:59 PM
QUOTE (PW3.com @ Feb 17 2010, 01:19 PM)

So... Anyone interested (besides Bradley LOL)?
WTF!!!!
An anonymous entry LOL you will never know!!! Buhahaha

Pretty sure he meant you were a given. Not that he didn't want you to participate.
GTB/ZR-1
Feb 23 2010, 08:07 AM
QUOTE (xer0trigger @ Feb 22 2010, 10:59 PM)

Pretty sure he meant you were a given. Not that he didn't want you to participate.
Exactly!
xer0trigger
Feb 23 2010, 03:30 PM
Ok, I emailed my submissions. I don't trust these forums for anything other than going down
Out of curiosity, who do I bribe... I mean... Who's judging the entries?
PW3.com
Feb 24 2010, 02:40 AM

I know silly people! I just thought it was funny, and flattering at the same retrospect- I hope I can get one in before the deadline though!!!
QUOTE (xer0trigger @ Feb 22 2010, 10:59 PM)

Pretty sure he meant you were a given. Not that he didn't want you to participate.
GTB/ZR-1
Feb 28 2010, 10:32 AM
Toady's the last day to get your entries in to Leland--FYI!!!
kabel
Feb 28 2010, 02:26 PM
dang it.
rx-7autoxer
Mar 2 2010, 09:48 AM
Thank you to all that submitted entries and good luck!
xer0trigger
Mar 2 2010, 04:27 PM
Good luck everyone!!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.